Erosion problem in tool steel using cold box core-making process

Rodríguez, Eduardo y Pérez, Alberto y Mercado Solis, Rafael David y Velasco Tellez, Abraham y Jiménez, Omar y Flores, Martín y González, Marco Aurelio y Ibarra, Jesús (2019) Erosion problem in tool steel using cold box core-making process. China Foundry, 16 (3). pp. 204-210. ISSN 1672-6421

[img]
Vista previa
Texto
23411.pdf - Versión Publicada
Available under License Creative Commons Attribution Non-commercial No Derivatives.

Download (811kB) | Vista previa

Resumen

This paper presents the erosion results of the AISI H13 steel impinged by resin-bonded silica sand, using a testing rig that closely simulates the real blowing conditions during industrial core-making. Steel specimens were heat treated to obtain hardness of 294, 445 and 595 HV200 (29, 45 and 55 HRC). Erosion tests were carried out at impingement angles from 20° to 90° and air drag pressures of 1.38, 2.07 and 2.76 bar (20, 30 and 40 psi). The main results are summarized as follows: (i) The harder material, the lower erosion; (ii) the maximum erosion rate is at 30°; (iii) Little difference in erosion rate at impact angle of 60° and 90° for a constant pressure tested regardless of the hardness level; (iv) As the pressure increases, so does the erosion rate, being more sensitive for low impact angles. Finally, a differential form of the general erosion equation is applied on a practical core-making case to evaluate the erosion rate of the H13 steel at 30° and 90° impingement angles.

Tipo de elemento: Article
Palabras claves no controlados: erosion, cold box, core-making, H13 tool steel, resin coated silica sand.
Materias: T Tecnología > TJ Ingeniería Mecánica
Divisiones: Ingeniería Mecánica y Eléctrica
Usuario depositante: Editor Repositorio
Creadores:
CreadorEmailORCID
Rodríguez, EduardoNO ESPECIFICADONO ESPECIFICADO
Pérez, AlbertoNO ESPECIFICADONO ESPECIFICADO
Mercado Solis, Rafael DavidNO ESPECIFICADONO ESPECIFICADO
Velasco Tellez, AbrahamNO ESPECIFICADONO ESPECIFICADO
Jiménez, OmarNO ESPECIFICADONO ESPECIFICADO
Flores, MartínNO ESPECIFICADONO ESPECIFICADO
González, Marco AurelioNO ESPECIFICADONO ESPECIFICADO
Ibarra, JesúsNO ESPECIFICADONO ESPECIFICADO
Fecha del depósito: 14 Jun 2022 20:30
Última modificación: 02 Sep 2022 18:30
URI: http://eprints.uanl.mx/id/eprint/23411

Actions (login required)

Ver elemento Ver elemento

Downloads

Downloads per month over past year