Corrosion Behavior of AISI 1018 Carbon Steel in Localized Repairs of Mortars with Alkaline Cements and Engineered Cementitious Composites

Maldonado Bandala, Erick y Higueredo Moctezuma, Noema y Nieves Mendoza, Demetrio y Gaona Tiburcio, Citlalli y Zambrano Robledo, Patricia del Carmen y Hernández Martínez, Héctor y Almeraya Calderón, Facundo (2020) Corrosion Behavior of AISI 1018 Carbon Steel in Localized Repairs of Mortars with Alkaline Cements and Engineered Cementitious Composites. Materials, 13 (15). pp. 1-14. ISSN 1996-1944

[img]
Vista previa
Texto
25190.pdf - Versión Publicada
Available under License Creative Commons Attribution Non-commercial No Derivatives.

Download (2MB) | Vista previa
URL o página oficial: https://doi.org/10.3390/ma13153327

Resumen

The selection of materials for repairs of reinforced concrete structures is a serious concern. They are chosen for the mechanical capacity that the repair mortar achieves. However, several important characteristics have been left aside, such as the adhesion of the repair mortar with the concrete substrate, the electrical resistivity and—hugely important—the protection against corrosion that the repair material can provide to the reinforcing steel. The aim of this work was to study the corrosion behavior of AISI 1018 carbon steel (CS) in mortars manufactured with alkaline cements, engineered cementitious composites (ECC), and supplementary cementitious materials (SCM). Two types of ordinary Portland cement (OPC) 30R and 40R were used. The constituent materials for the mortars with ECC mixture mortars they use OPC 40R, class F fly ash (FA), silica fume (SF) and polypropylene (PP) fibers. The sodium hydroxide (NaOH) and sodium silicate (Na2SiO3) were used as activating agents in alkali activated cements. The reinforced specimens were immersed in two different electrolytes, exposed to a 3.5 wt % of NaCl and Na2SO4 solutions, for 12 months and their electrochemical behavior was studied by half-cell potential (Ecorr) and linear polarization resistance (LPR) according to ASTM C876-15 and ASTM G59-97, respectively. The results obtained indicated that, the mortar they have the best performance and durability, is the conventional MCXF mortar, with OPC 30R and addition of 1% polypropylene PP fiber improves the behavior against the attack of chlorides and sulfates

Tipo de elemento: Article
Palabras claves no controlados: Repair mortar, Corrosion, Engineered cementitious composites, Aalkali-activated, Supplementary cementitious materials, Electrochemical techniques.
Materias: CONACYT > Ingeniería y Tecnología
T Tecnología > TA Ingeniería General y Civil
Divisiones: Ingeniería Mecánica y Eléctrica
Usuario depositante: Dra Citlalli Gaona
Creadores:
CreadorEmailORCID
Maldonado Bandala, ErickNO ESPECIFICADONO ESPECIFICADO
Higueredo Moctezuma, NoemaNO ESPECIFICADONO ESPECIFICADO
Nieves Mendoza, DemetrioNO ESPECIFICADONO ESPECIFICADO
Gaona Tiburcio, Citlallicitlalli.gaonatbr@uanl.edu.mxorcid.org/0000-0001-9072-3090
Zambrano Robledo, Patricia del Carmenpatricia.zambranor@uanl.edu.mxNO ESPECIFICADO
Hernández Martínez, HéctorNO ESPECIFICADONO ESPECIFICADO
Almeraya Calderón, Facundofacundo.almerayacl@uanl.edu.mxorcid.org/0000-0002-3014-2814
Fecha del depósito: 15 Mar 2023 21:00
Última modificación: 15 Mar 2023 21:00
URI: http://eprints.uanl.mx/id/eprint/25190

Actions (login required)

Ver elemento Ver elemento

Downloads

Downloads per month over past year