Thermomechanical Performance of fr-4 Laminates in the Manufacturing Process of Printed Circuit Boards.

Rodríguez Vázquez, Carlos Alfonso (2016) Thermomechanical Performance of fr-4 Laminates in the Manufacturing Process of Printed Circuit Boards. Doctorado thesis, Universidad Autónoma de Nuevo León.

[img]
Vista previa
Texto
1080238129.pdf - Versión Aceptada
Available under License Creative Commons Attribution Non-commercial No Derivatives.

Download (35MB) | Vista previa

Resumen

Printed Circuit Boards (PCB’s) are an important component for any electronic device, they can be found in cell phones, computers, tablets, televisions, radios, remote controls, among others. In automotive industry, PCB’s are incorporated into the board containing tachometers, water, oil, gasoline levels and all signals displayed on the board. PCB’s contain electronic components such as: electric motors, resistors, capacitors, micro-controllers and LED’s, just to name a few. To join them, a solder paste of tin, silver and copper alloy (Sn-Ag-Cu) is applied on the PCB surface; then the PCB is processed into a reflow oven at temperature range of 24oC-250oC allowing the solder paste to flow and join the electronic components with the PCB, an operation called “reflow process”. In 2006 the Restriction of Hazardous Substances (RoHS) prohibited the use of lead (Pb) in solder paste, which has a melting temperature around 180oC, whereas lead-free solder pastes have a melting point around 230oC, 30oC-40oC higher than Pb solder paste, this has generated PCB thermo mechanical problems due to the temperature increase at which the material is exposed. Typical problems are related with deformations of the PCB in the reflow process, such as “warpage”, which is a deformation along the “z” axis and is accompanied by other phenomena called “bow” and “twist’, “bow” is characterized by a curvature of cylindrical shape on both sides of the PCB whereas “twist” is characterized by the elevation of the corners. “Warpage”, “bow” and “twist” affect subsequent processes such as: assembling engines, micro-controllers, improper electrical tests, false contacts, bending of electronic components and fractures at the interphase between electronic component and the PCB. The present research work studies the relation between material thermal properties, PCB configurations and reflow conditions with “warpage” “bow” and “twist” during the reflow process by the thermal characterization of base materials, deformations measurements and temperature reflow profiles. Thermal properties obtained were: glass transition temperature (Tg), decomposition temperature (Td), Coefficient of thermal expansion (CTE), time to delamination and %water absorption, deformations measurements were obtained on 30 PCB’s after exposure. Temperature profiles were obtained by placing thermocouples on the PCB. Our results suggest that there is a discrepancy between the thermal properties obtained experimentally and data sheet provided by the supplier. PCB “bow” and “twist” data obtained exceeds the values established by the IPC-2221B standard and the temperature profiles met the requirements of the quality control in the company. It is found that there is a mismatch between temperature profiles, it is speculated a relationship with preferential deformations during reflow process. The present work contribution consists in a whole study of PCB thermo-mechanical performance during reflow process considering material thermal properties, reflow conditions and the influence on PCB deformations.

Tipo de elemento: Tesis (Doctorado)
Información adicional: Doctor en Ingeniería de Materiales
Materias: T Tecnología > TA Ingeniería General y Civil
Divisiones: Ingeniería Mecánica y Eléctrica
Usuario depositante: Editor Repositorio
Creadores:
CreadorEmailORCID
Rodríguez Vázquez, Carlos AlfonsoNO ESPECIFICADONO ESPECIFICADO
Fecha del depósito: 06 Mayo 2019 20:59
Última modificación: 06 Mayo 2019 20:59
URI: http://eprints.uanl.mx/id/eprint/15713

Actions (login required)

Ver elemento Ver elemento

Downloads

Downloads per month over past year